Description

VRC Standard Gates

All conveyors are required by ANSI/ASME B20.1 code to have enclosures and VRC standard gates at each stop or landing. Each application should be examined for adherence to national, state and local codes.

Bi-Parting Swing Gate:

• Requires 8′ vertical clearance at either level
• Meets ANSI/ASME B20.1 Safety Standards
• Rigid Steel Construction
• Gate panels are constructed of flattened expanded metal in a tube and angle framing
• Heavy duty, maintenance free hinges
• Gate panels are latched using an electro-mechanical interlocking device
• No Solenoids to Fail
• Best used where space is a premium (10-ft max. width recommended)
• Ships disassembled with anchors and assembly hardware provided

Single Panel VRC Standard Gate:

• Requires 14′-4″ vertical clearance at either level
• Meets ANSI/ASME B20.1 Safety Standards
• Rigid Steel Construction
• Gate panel is counterweighted and constructed of flattened expanded metal in a tube and angle framing
• Heavy duty roller chain and sprockets
• Gate panel is latched using an electro-mechanical interlock
• No Lifting cables to break or solenoids to fail
• Best used where aisle space is minimal with no height restrictions (12-ft max. width recommended)
• Ships disassembled with anchors and assembly hardware provided
• Powered Vertical-Acting Gate available for faster material loading
• Wall-Mounted Pushbutton or Pendant Gate Motor Control
• PLC Interface available for Automated Gate Control during Conveyor Loading / Unloading
• Consult factory for your specific gate motor control requirements

Bi-Panel Acting Gate:

• Requires 11′-6″ vertical clearance at either level
• Meets ANSI/ASME B20.1 Safety Standards
• Rigid Steel Construction
• Gate panels are counterweighted and constructed of flattened expanded metal in a tube and angle framing
• Heavy duty roller chain and sprockets
• Gate panels are latched using an electro-mechanical interlock
• No Lifting cables to break or solenoids to fail
• Best used where isle space is minimal but height is available (12-ft max. width recommended)
• Ships disassembled with anchors and assembly hardware provided

Single Panel Swing Gate:

• Requires 8″ vertical clearance at either level
• Meets ANSI/ASME B20.1 Safety Standards
• Rigid Steel Construction
• Gate panel is constructed of flattened expanded metal in a tube and angle framing
• Heavy duty maintenance free hinges
• Gate panel is latched using an electro-mechanical interlocking device
• No solenoids to fail
• 6-ft maximum width recommended
• Available in either swing direction (hinged on left or right)
• Ships disassembled with anchors and assembly hardware provided